Bitcoins Mining - so geht's - CHIP

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Getting frustrated with Ubuntu. Are my experiences the norm for a Linux user?

Let me start off by saying that I'm not a total newb, but still pretty green. I like to believe I'm capable with computers, and know enough to figure out most issues. I also have a pretty solid general understanding of how they function. Been a Windows user most of my life, but decided to make the switch to Linux a few years back.
My experiences thus far are making me reconsider the switch, despite the fact that I've really become opposed to using Windows. I'm curious if I should expect more of the same indefinitely, or if my experiences up to this point are unusual, and I should expect to reach a point where I can just use the OS, instead of spend hours trying to perform every task.
It all started when I downloaded Ubuntu about three years ago. I easily got it installed as a dual boot on a Windows machine. Had to start by allocating disk space in Windows for the new Linux install, prepared a live usb, went through the install, cake. Then I started trying to do stuff, like use a printer. Well HP doesn't make a driver for Linux and, probably, 2-4 hours of research led to me still not having a working printer. I found a driver, but the process to get it installed did not work as it was supposed to. I forget the specifics, but I followed a tutorial to the T, but ran into unforeseen installation issues, and never could figure out how to get the process complete.
After that I started running into issues with the FireFox browser. I've alwasy used FF on Windows with no issues. On Ubuntu it ran slower than dial-up from the mid-90's. Again, 2-4 hours worth of research and several changes to things like FF settings, disabling add-ons, etc., and I still had no fix.
Still I wasn't deterred. Then the dual boot broke. I tried boot repair. No dice. Tried for several hours to get it working. Asked about it on forums, sent in results of boot repair (where I forget) only to get no response, and finally I threw in the towel.
I also struggled to get Bitcoin Armory working, with some very frustrating success, but I didn't count that against Linux, since it was very new software, and I wasn't surprised it was buggy.
Fast forward to today. I've been using Windows for a couple years, with few attempts made to use Linux, except for trying to retrieve a very small amount of BTC from Armory, which consumed about three weekends of my life to finally achieve.
Now I've decided to give it another go. I downloaded UbuntuStudio b/c I'd like to use some of the music production software that comes with it.
Following some tutorials online, I tried to connect my midi keyboard to the computer using QJackCtl. I couldn't remember the issue that I ran into when starting to type this up, so I tried to repeat the process, only to have the program crash during start up, three times. The computer had literally just restarted 20 minutes ago, so I doubt a reboot would work, but maybe. It's almost funny at this point. I'm really disappointed that I can't get the audio software that came with the distro working "fresh out of the box." Maybe with a few hours, or weekends, worth of research?
I've also been getting a system error message every time I login. I posted a query on the Ubuntu forums. That issue has yet to be sorted out.
I hesitate to include this next part, because it involves software that is really still in it's early stages, and I'm trying to be realistic in taking the perspective that any problems I encounter are with the new software, not Ubuntu, but the fact that I had zero problems getting the same stuff to work in Windows just adds to my frustration with Ubuntu.
Everything I'm about to describe is involved with installing monero mining and wallet software. The exception is the AMD drivers needed for the GPU I'm using to mine. Those I expected to work without issue. I followed the directions for installing the AMD drivers for Ubuntu on the AMD website, and the program would not work. After, you guessed it, 2-4 hours of research, I finally, almost by accident, installed an older version of the driver software. Boom, it worked. WTF man?! When I installed the Windows version it took 2 minutes.
Moving on, I tried getting the xmr-stak mining software working. This took me several hours, spread over several days to sort out. Same with the monero-gui wallet, which actually I've only got half-way working. In fact, I've tried installing the monero-gui by two different ways. In the process I've inadvertently got the monerod daemon running, but not the gui. Actually, the monerod daemon starts with the computer and I haven't even started trying to figure out how to turn that off, since what's the point of having it run if I can't use the gui?
In Windows I had all of this up and running in a couple of hours. And in saying that I'm prepared for the "if you like Windows so much then use that!" or "you're just too thick to figure it out!", but I don't like Windows, and I don't think it's a matter of not figuring it out. It seems to me that the reason I've spent dozens of hours just trying to get things to work in Linux is that nearly every time I've tried to do something, there is inevatably some error along the way where following the directions isn't good enough, and sorting out the issue is a feat in and of itself.
I just want to know if this is unusual, or if this is how it's going to go forever if I keep using Linux. Is my experience typical?
TL;DR: I've had a litany of issues and spent countless hours trying to fix them using Linux. Is this rare, and I've just had an unusual experience, or actually pretty common, and I should just accept it as the cost of using an open source OS?
submitted by rtfioeti to Ubuntu [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

Step by step in staking Redd with Raspberry Pi 3

Before I start, I would like to pay complete credits to these two guys :)
https://www.reddcointalk.org/topic/2679/reddcoin-staking-via-ubuntu-mate-on-raspberry-pi-3-model-b-march-2018 (most of my steps, if not all, are from this link)
https://github.com/joroob/reddcoin/blob/mastedoc/build-arm.md
All the steps I am writing is ABSOLUTELY NECESSARY, please don't try to skip it because I did, and it doesn't work.
step 1: get a Raspberry Pi B https://www.raspberrypi.org/products/#buy-now-modal
step 2: make sure you get proper power supply 5v 2A - the Pi will mine, it will need sufficient power. Regular USB samsung charger will not work.
step 3: get proper micro SD card (SanDisk for example) 32Gb++
step 4: USB + Mouse keyboard
step 5: flash micro SD card with Ubuntu MATE
Download Ubuntu Mate image: https://ubuntu-mate.org/raspberry-pi/
Download Etcher: https://etcher.io
After finishing downloading, use Etcher to write/flash the image on micro SD card
After this, your SD card contains Ubuntu MATE OS.
step 6: Place SD Card into Raspberry Pi 3 and start it up. You should be able to see Ubuntu OS! Congrats!
step 7: Connect to wifi or internet cable (internet is better and faster)
step 8: OPTIONAL - turn off UI OS, so that things will work faster
Open XTerminal:
sudo systemctl disable lightdm.service (to turn UI off) 
in case you want to turn UI on again, run this:
sudo systemctl start lightdm.service (to turn UI on) 
step 9: install all dependencies
sudo apt-get update && sudo apt-get install git build-essential libqt4-dev libprotobuf-dev protobuf-compiler libtool autotools-dev autoconf libssl-dev libboost-all-dev wget pkg-config sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install db4.8 sudo apt-get install libminiupnpc-dev sudo apt-get install libqrencode-dev Reboot 
step 10: add additional RAM (sort of) in case the App need it, this is call "Create Swap file"
sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile echo ‘/swapfile none swap sw 0 0’ | sudo tee -a /etc/fstab 
step 11: Build Berkeley Database
wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar xfvz db-4.8.30.NC.tar.gz cd db-4.8.30.NC cd build_unix ../dist/configure --enable-cxx make sudo make install 
step 11.5: Set BerkeleyDB path
export CPATH="/uslocal/BerkeleyDB.4.8/include" export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib" export LD_LIBRARY_PATH=/uslocal/BerkeleyDB.4.8/lib/ 
step 12: Build Reddcoin Wallet
---download source code ---- only source from joroob/reddcoin will work because some stweak was needed for ARM CPU
cd ~ git clone https://github.com/joroob/reddcoin.git 
---build reddcoin ----
cd reddcoin ./autogen.sh ./configure --with-gui=no --disable-tests cd src make sudo make install 
If you finish this, you are in a great position!!!
step 13: Create reddcoin configuration file
cd ~ mkdir .reddcoin && cd .reddcoin nano reddcoin.conf rpcuser=YOUR OWN USERNAME, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT rpcpassword=YOUR OWN PASS WORD, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT 
step 14: Use bootstrap
(At this point, you had a running reddcoin daemon, now you can start staking. But syncing the full chain takes long time.)
cd ~/.reddcoin wget https://github.com/reddcoin-project/reddcoin/releases/download/v2.0.1.2/bootstrap.dat.xz xz -d bootstrap.dat.xz 
step 15: start the reddcoin daemon service cd ~/reddcoin/src ./reddcoind -daemon
After this, you can test if the daemon is working, by perform this command: ./reddcoin-cli getblockcount
step 16: if your app is not able to sync, it is probably the firewall issue with OS, run this to allow port 45444 (used by Reddcoin) and redo step 15
sudo iptables -I INPUT 1 -i eth0 -p tcp --dport 45444 -j ACCEPT sudo iptables -A OUTPUT -p tcp --dport 45444 -j ACCEPT 
step 17: open BEER and enjoy! This is a MUST or the daemon will stop working! I am not kidding!
step 18: Actually, i forgot to mention you need to execute this command for the wallet to stake:
reddcoind walletpassphrase $yourpassword 9999999 true 
ADDITIONAL REMARKS:
From my PC: I am using putty to execute the command, winSCP to monitor the file location on raspberry.
Moving Red Coins out of exchange really a big move, start with normal wallet, don't start with this tutorial :) Ever since I move my coins out of exchange, I am free from all of the ups and downs! Really!
So guys and gals, Redd On!
UPDATE 18 Mar: my first stake has arrived after 6 days staking :)
In case you want to tip me: RaF3TeWqgTzAdnaZQffnsxS74dag13zsAY
Edit 1: Format stuff
Edit 2: Add step 18 to execute staking command.
Edit 3: In case you don't want to compile the source code, you can download my compile version here: https://github.com/hieplenet/reddcoin/releases/tag/v2.0.0.0 (but doing this, you should be aware of the risk of me changing source code for my benefit - I don't change any thing, but you should be cautious, this is the internet :) )
submitted by hieplenet to reddCoin [link] [comments]

Uso del Full Node Wallet BTCP Bitcoin Private da Terminale Linux

In questo post voglio dimostrare alcuni utilizzi del Full Node Wallet Bitcoin Private da terminale Linux
AVVERTENZA:
Usate questo tutorial con un piccolo quantitativo di BTCP, nell'esempio utilizzo 0,01 BTCP, almeno fino a quando non vi sentite sicuri nell'uso dei comandi. Fate attenzione! I comandi vengono eseguiti senza possibilità di annullarli, salvo in casi eccezionali, quindi fate tutto a vostro rischio.
PREMESSA:
Il wallet è già stato installato sul vostro PC o in un server Cloud usando le seguenti istruzioni:https://github.com/BTCPrivate/bitcoinprivate
Io uso una Ubuntu 16.04 LTS 64bit, ma i comandi sono simili anche per la distribuzione Windows.
Andrebbe anche aperta la porta TCP 7932 per avere un wallet perfettamente funzionante, ma ho fatto le prove senza aprirla.
Come attivare il firewall:
sudo ufw status
Please note: Make sure you enter the code in this order! If you do not, the program will not work! (If need be you can disable your firewall by entering: sudo ufw disable)
sudo ufw default allow outgoing sudo ufw default deny incoming sudo ufw allow ssh/tcp sudo ufw limit ssh/tcp sudo ufw allow http/tcp sudo ufw allow https/tcp sudo ufw allow 7932/tcp sudo ufw logging on sudo ufw enable
Apri un nuovo terminale troverai il prompt dei comandi, il mio è così, ma potrebbe essere differente:
[email protected]:~$ 
Scrivi quello che segue e premi invio:
[email protected]:~$ ./BitcoinPrivate/src/btcpd --daemon 
dovrebbe apparire il seguente messaggio:
BTCP Server Starting 
Questo significa che hai avviato il server (full node wallet) in modalità daemon, silenziosa. Per fermarlo scrivi:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli stop 
Otterrai la risposta:
BTCP server stopping 
Puoi anche avviare il wallet in una finestra del terminale e vederlo lavorare, anzichè usare il comando --daemon
[email protected]:~$ ./BitcoinPrivate/src/btcpd 
Vedreai apparire un logo del BTCP formato da tanti caratteri e la seguente scritta:
Thank you for running a Bitcoin Private node! You're strengthening the network and contributing to a social good. To ensure you are fully protecting your privacy when running BTCP, see . Block height | 340079 Connections | 8 Network solution rate | 8359387 Sol/s You are currently not mining. To enable mining, add 'gen=1' to your btcprivate.conf and restart. Since starting this node 1 minutes, 33 seconds ago: - You have validated 695 transactions! [Press Ctrl+C to exit] [Set 'showmetrics=0' to hide] 
Block height è l'allineamento del wallet con la blockchain, richiede tempo perchè si allinei e scarichi tutta la blockchain, dipende dalla velocità del tuo collegamento e del tuo pc.Connections: 8 sono i nodi a cui è collegato il nostro wallet, che è un vero e proprio nodo.
Network solution rate è la "potenza" di tutta la rete di elaborare i blocchi in Sol/s
Con un full node puoi partecipare anche tu a rafforzare la rete, abilitando il mining. Si tratta di un solo mining, quindi le probabilità di risolvere un blocco sono veramente minime.
Per farlo basta aggiungere la voce gen=1 nel file btcprivate.conf
Proviamo a farlo. Blocchiamo il nodo con il comando CTRL + C e aspettiamo che appaia il prompt di comando.
Appena appare, inseriamo i seguenti comandi:
[email protected]:~$ cd .btcprivate [email protected]:~/.btcprivate$ ls 
ci siamo spostati nella directory nascosta (inizia per .) contenente i file di configurazione di BTCP, ls mostra i file contenuti:
blocks btcprivate.conf chainstate db.log debug.log fee_estimates.dat peers.dat wallet.dat 
puoi vedere il file btcprivate.conf e wallet.dat che è il file del wallet del nodo. Editiamo ora il file di configurazione, io uso PICO, un text editor per linux, ma potete usare anche vi se preferite:
[email protected]:~/.btcprivate$ pico btcprivate.conf 
inserite gen=1 in una riga vuota del file di configurazione e poi chiudete l'editor salvando con i comandi CTRL+X e Y
gen=1 
tornate nella directory home:
[email protected]:~/.btcprivate$ cd 
Fate riavviare il wallet con il comando:
[email protected]:~$ ./BitcoinPrivate/src/btcpd 
Otterrete il seguente output:
Block height | 340091 Connections | 8 Network solution rate | 8211926 Sol/s Local solution rate | 0.0075 Sol/s Since starting this node 8 minutes, 5 seconds ago: - You have validated 684 transactions! - You have completed 1 Equihash solver runs. You are mining with the default solver on 1 threads. 
Congratulazioni! State minando!
Ora diamo un occhiata al file wallet.dat
ATTENZIONE:
wallet.dat è il vostro wallet, se lo cancellate o lo riscrivete perderete tutti i BTCP che contiene. Consiglio di farne una copia ma attenzione: wallet.dat non è crittografato, quindi vi consiglio di crittografarlo prima di spostarlo dal PC: primo faccio una copia.
Bloccate nuovamente il wallet con CTRL+C
Al prompt scrivete:
[email protected]:~$ cd .btcprivate 
Poi copiate il file sul Desktop (scrivania) Sostituite la parola Desktop con Scrivania se avete installato Linux in Italiano
[email protected]:~/.btcprivate$ cp wallet.dat home/btcp/Desktop/wallet_btcp_back.dat 
Ora troverete il file wallet_btcp_back.dat sulla scrivania, crittografatelo AES256 usando il gestore degli archivi GUI e impostando una password resistente. Per verificare che tutto funzioni, vi consiglio di fare una altra copia di wallet.dat, estrarre il file dall'archivio crittato e sostituirlo al wallet.dat. se tutto funziona siete a posto. Se non siete sicuri non fate nulla e non usate questo wallet per mettere i vostri BTCP, ma nolo per scopi didattici con pochi spiccioli. E' facile fare errori e perdere tutto.
Tornate alla directory home e riavviate il server in daemon mode.
proviamo alcuni comandi usando il client: btcp-cli
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli help 
Se tutto funziona correttamente vi risponderà con la lista di tutti i comandi disponibili:
z_exportwallet "filename" z_getbalance "address" ( minconf ) z_getnewaddress z_getoperationresult (["operationid", ... ]) z_getoperationstatus (["operationid", ... ]) z_gettotalbalance ( minconf ) z_importkey "zkey" ( rescan startHeight ) z_importwallet "filename" z_listaddresses z_listoperationids z_listreceivedbyaddress "address" ( minconf ) z_sendmany "fromaddress" [{"address":... ,"amount":...},...] ( minconf ) ( fee ) z_shieldcoinbase "fromaddress" "tozaddress" ( fee ) zcbenchmark benchmarktype samplecount zcrawjoinsplit rawtx inputs outputs vpub_old vpub_new zcrawkeygen zcrawreceive zcsecretkey encryptednote zcsamplejoinsplit [email protected]:~$ 
Benissimo! Ora proviamo ad usare qualche comando, comunciamo con getinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getinfo 
Risposta:
{ "version": 1001251, "protocolversion": 180004, "walletversion": 60000, "balance": 0.00000000, "blocks": 340074, "timeoffset": 0, "connections": 8, "proxy": "", "difficulty": 167290.7158221716, "testnet": false, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000, "relayfee": 0.00000100, "errors": "" } [email protected]:~$ 
Nella risposta troverete alcune informazioni sul wallet, versione, block height, connections, balance = 0 ecc ecc
Proviamo ora getblockchaininfo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getblockchaininfo 
Risposta:
{ "chain": "main", "blocks": 340074, "headers": 340074, "bestblockhash": "0000000145c0011d8e914f4ba68d1443c7ae0dd15bdf0bc300994dd5282710aa", "difficulty": 165971.1181999981, "verificationprogress": 0.9999992572690658, "chainwork": "0000000000000000000000000000000000000000000000000002e8314e4484da", "pruned": false, "commitments": 663480, 
La sincronizzazione in questo caso è terminata:"verificationprogress": 0.9999992572690658, (99,99999%)
Ora proviamo getwalletinfo
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 0, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } [email protected]:~$ 
Proviamo a ricevere dei BTCP da un wallet esterno, per prima cosa abbiamo bisogno di un transparent address da comunicare a chi ci invia i BTCP. Lo otteniamo con il comando getnewaddress:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getnewaddress 
Risposta: otteniamo un indirizzo (le xxx le ho aggiunte per mascherarlo)
b1Cabjwvcce7N8ea9Gxxxxxxxxxxxxxxxx [email protected]:~$ 
Inviate con un vostro wallet grafico o con electrum pochi BTCP, io ne ho mandati 0.01 per prova, dopo che li avete inviati, verificate se sono arrivati:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00000000, "unconfirmed_balance": 0.01000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
Arrivati ! "Unconfirmed balance" 0.01! non sono ancora confermati, quindi aspettate un po' e ripetete il comando:
"walletversion": 60000, "balance": 0.01000000, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 1, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 
Adesso balance è 0.01 perfetto!
Proviamo adesso ad inviare questi BTCP ad un nuovo T-Address, per semplicità li invierò ad un indirizzo di questo wallet
Generiamo un nuovo indirizzo per riceverli:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getnewaddress 
Otteniamo:
b1Nb42GoK9kmsxxxxxxxxxxxxx 
copiamo l'indirizzo e usiamo il comando sendtoaddress "btcpaddress" amount ( "comment" "comment-to" subtractfeefromamount )
il parametro subtractfeefromamount puo' essere true or false a seconda se vogliamo che le fee vengano detratte dall'ammontare inviato o meno. Io invio tutto quanto al nuovo indirizzo e quindi le fee vanno dedotte da questo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli sendtoaddress "b1Nb42GoK9kmsxxxxxxxxxxxxx" 0.01 "" "" true 
Risposta:
2c5d3d1a3b5eec414b721d3817487f53c5eebxxxxxxxxxxxxxxx [email protected]:~$ 
Controlliamo cosa è successo:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli getwalletinfo 
Risposta:
{ "walletversion": 60000, "balance": 0.00999808, "unconfirmed_balance": 0.00000000, "immature_balance": 0.00000000, "txcount": 2, "keypoololdest": 1528833903, "keypoolsize": 101, "paytxfee": 0.00000000 } 
Come vedete i BTCP sono diminuiti, perchè sono stati spostati su un nuovo indirizzo dello stesso wallet, pagando le fee. Ora vediamo esattamente dove sono e dove erano:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listreceivedbyaddress 
Risposta:
[ { "address": "b1Ep2wi2tUnKf433Vaxxxxxxxxxxxx", "account": "", "amount": 0.01000000, "confirmations": 6, "txids": [ "833533440a13c09fda6e90d0c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] }, { "address": "b1Nb42GoK9kmsVZ9KPxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "account": "", "amount": 0.00999808, "confirmations": 1, "txids": [ "2c5d3d1a3b5eec414b721d3817487f53c5xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" ] } 
Questo comando vi da informazione di tutti gli indirizzi usati, vediamo solo gli indirizzi non spesi: listunspent
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Risposta:
[ { "txid": "2c5d3d1a3b5eec414b721d381748xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1Nb42GoK9kxxxxxxxxxxxxxx", "account": "", "scriptPubKey": "76a914c6bdf3bc8aedxxxxxxxxxxxxxxxxxx", "amount": 0.00999808, "confirmations": 6, "spendable": true 
Ottimo!
Ora possiamo provare un comando che ci permette di estrarre la chiave provata da un indirizzo pubblico. Questo puo' essete utile in occasione di Fork o Airdrop per estrarre le monete.
ATTENZIONE: esporre a terzi le chiavi private è rischioso. Potrebbero rubare tutto il contenuto. Fate molta attenzione. Estraete le private keys solo se necessario o per fare delle prove su indirizzi che contengono pochi spicci. In ogni caso, dopo aver usato la private key meglio non riutilizzare quell'indirizzo.
Il comando da utilizzare è dumpprivkey T-ADDRESS
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli dumpprivkey b1Ep2wi2tUnxxxxxxxxxxx 
L'output sarà tipo il seguente, al solito la chiave è mascherata con delle xxxxxx
Kz29e62Bmxxxxxxxxxxxxxxxxxxxxxxx 
Ora proviamo lo swipe della chiave, cioè il wallet andrà a cercare nella blockchain tutti gli importi collegati a quella pvt key, : importprivkey "btcpprivkey" ( "label" rescan )
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli importprivkey "Kz29e62Bmxxxxxxxxxxxxxxxxxxxxx" "" true 
Ora proviamo a fare delle Shielded Transaction, queste transazioni utilizzano la tecnologia zk-Snark per mascherare importi e indirizzi. Per prima cosa dobbiamo ottenere un indirizzo Shielded dal nostro wallet.
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getnewaddress 
Eccolo generato:
zkEvCiVwgHb3NFi2ee9HGPjno2xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 
Vediamo dove sono i nostri BTCP, al momento sono solo su indirizzi Transparent:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_gettotalbalance 
Answer:
{ "transparent": "0.00999808", "private": "0.00", "total": "0.00999808" } 
ora mandiamo qualche BTCP all'indirizzo z_address. Per prima cosa dobbiamo recuperare l'indirizzo t-address dove si trovano:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli listunspent 
Eccoli:
[ { "txid": "72f568d1ed51524b69f1xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx", "vout": 0, "generated": false, "address": "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx", "scriptPubKey": "76axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxe088xx", "amount": 0.00889808, "confirmations": 556, "spendable": true } ] 
Adesso mandiamo un po' di BTCP all'indirizzo Shielded che abbiamo ottenuto sopra. Il comando è abbastanza complicato ma funziona cosi':
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_sendmany "b1LDhxBJxxxxxxxxxxxxxxxxxxxxxx" "[{\"amount\":0.001, \"address\":\"zkEvCiVwgHb3xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx\"}]" 
Risultato:
opid-xxxxxxx-36c4-xxxx-beb2-xxxxxxxxxxxx 
Una transazione zk-Snark è piuttosto pesante da elaborare, il mio vecchio PC ci mette un po'. Meglio disattivare processi inutili. Si puo' controllare se l'operazione è andata a buon fine:
[email protected]:~$ ./BitcoinPrivate/src/btcp-cli z_getoperationresult 
al termine dovreste ricevere il seguente output:
[ { "id": "opid-xxxxxx-xxxxx-4a5d-beb2-xxxxxxxxxx", "status": "success", "creation_time": 1529426885, "result": { "txid": "f87e8d5e96a8a0xxxxxxxxxxxxxxx" }, "execution_secs": 216.686332567, "method": "z_sendmany", "params": { "fromaddress": "b1LDhxxxxxxxxxxx", "amounts": [ { "amount": 0.001, "address": "zkEvCiVwgHb3NFxxxxxxxxxxxxxxxxxxR" } ], "minconf": 1, "fee": 0.0001 } } ] 
Fatto! Sul mio vecchio PC ci sono voluti 216,68 secondi!
La prossima prova sarà un invio da indirizzo Shielded a Transparent.
Play with your full node wallet and have fun.Remember: these commands are almost the same in all the bitcoin based coins, so you also learnt how to use many other wallets!
submitted by xivan71 to u/xivan71 [link] [comments]

[Guide] Bitcoin Mining With MinerGate - Super Easy GUI Supported Bitcoin mining with GUIminer tutorial - easy! - YouTube Mining Altcoins (Lbry coin) on Ubuntu  Nvidia - CCminer Noob's Guide To Bitcoin Mining - Super Easy & Simple - YouTube HowTo: Bitcoin Mining Tutorial/German

While Bitcoin mining got to a whole new level, Bitcoin Gold is designed especially for GPU mining. This means, you only need a desktop computer and a Graphics card to start earning money today. Already a Zcash miner or new to mining, this is a complete guide for you to get started from buying the necessary hardware to setting up the software and calculating your profits. Bitcoin-Mining-Pools sind Gruppen von Bitcoin-Minern, die kooperieren, um einen Block zu lösen, und sich den Ertrag teilen. Ohne Bitcoin-Mining-Pool schürfen Sie möglicherweise über ein Jahr lang Bitcoins und verdienen keine einzige Bitcoin. Es ist weitaus angenehmer, sich die Arbeit zu teilen und den Ertrag unter einer deutlich größeren Gruppe von Bitcoin-Minern aufzuteilen. Hier einige ... 4. EasyMiner. EasyMiner is a GUI based software and it acts as a convenient wrapper for CGMiner and BFGMiner software.. EasyMiner can be used for solo mining, CPU mining, cuda mining, pool mining etc and it supports the stratum and getwork mining protocols. When available, it automatically uses AVX, AVX2, and SSE2. 5. BitMinter. BitMinter is a mining pool that wants bitcoin mining to be easy ... In this tutorial you will learn how to configure Linux on a mining computer that uses Nvidia GPU’s. We will also configure the computer to use SSH, so we can control the computer from another computer. The main advantage of setting up your mining computer using SSH is primarily because if you have multiple mining computers, you can control all of them from a main desktop or laptop that is ... Litecoin Mimble Wimble, Aussie Gemini, Burning Satoshi Nakamoto & Secret Crypto Mining; December 15, 2019 Bitcoin Stock Dividends, France + Bitcoin, Countries Holding Bitcoin & IMF + Stablecoins; December 30, 2019 Should You Purchase A Bitmain Antminer S9 Bitcoin Miner In 2019 Or 2020? November 11, 2019

[index] [24232] [15323] [11600] [48395] [24762] [7122] [24564] [4130] [38754] [19165]

[Guide] Bitcoin Mining With MinerGate - Super Easy GUI Supported

How to mining Bitcoin with your Ubuntu VPS? Earn 0.0001 BTC per VPS, if you have 10 VPS, you will earn 0.001 BTC per day (~2.5 USD), if you have a lot of VPS, you will earn more BTC per day. Setup ... In this video I show how to mine Bitcoin using GUIminer (for Windows). GUIminer is easy to set up, settings for all the popular miningpools are already fille... You can mine with a cool and super easy GUI Miner. No need to learn about console, bash script. No need to learn about console, bash script. If you don't have Bitcoin, ETH wallet, register here ... How to splice wires - how to solder, how to crimp, wire connectors - Duration: 10:01. Make It Easy Mechanic Recommended for you Yeah endlich fertig :D sorry für die abgefuckte auflösung :/ Hier die Links: GuiMiner für Windows: https://cloud.github.com/downloads/Kiv/poclbm/guiminer-201...

#